CCT Performance Turbo G25-550 Point Milled Billet & Dual Ball Bearing Turbo
The CCT Performance Turbo G25-550 is the latest in turbocharger technology.
Featuring a lightweight billet 8 Blade point milled wheel, oil ports on both sides of the turbo core, ceramic Dual Ball Bearing and v-band flanges, this is the ultimate package for a smaller engine looking for quick spool and high power.
- Inducer- 48MM
- Exducer- 60MM
- 3 Inch Inlet (Slip On)
- 2 Inch Outlet
- 0.70 A/R
- Speed Sensor Port
- Inducer- 54MM
- Exducer- 49MM
- Inlet 2.5 Inch V-Band
- Outlet 3 Inch V-Band
- 0.72 A/R (EXTERNAL GATE)
-German Ceramic Dual Ball Bearings
-Ultra Seal Oil Rings
-Oil & Water Cooled
Gaskets & Fittings
-Oil Feed Gasket
-2x Oil Restrictors (Only Use If Required)
Ceramic Ball Bearing
Ceramic Ball Bearings are used in our cartridges as they don’t suffer with heat as a normal stainless ball bearing would, there also low friction, to ensure smooth rotations and a quicker spooling turbo.
Point Mill Compressor Wheels
Point milling is the latest in comp wheel technology, point milling takes twice the time of a normal flank mill, point milling makes the compressor wheel lighter and the design makes the compressor wheel 2% more efficient over the standard flank mill.
If you are not sure if this product is correct for your vehicle, please call us on 03 8766 8888 or email firstname.lastname@example.org
Note: please contact us with your paint code if selecting custom color option during checkout.